HDanywhere MHUB PRO (8X8) 70 Quick Start Manual

Download Quick start manual of HDanywhere MHUB 4K 8X8 PRO Chassis for Free or View it Online on All-Guides.com.

HDanywhere MHUB 4K 8X8 PRO Quick start manual - Page 1
1
HDanywhere MHUB 4K 8X8 PRO Quick start manual - Page 2
2
QUICK START GUIDE
FULL MANUAL ON HDANYWHERE.COM/SUPPORT
1
Connect a HDMI source device (e.g Satellite/Cable TV, Apple TV, Blu-ray, DVD
etc) to one of the ports labelled “SOURCE INPUT” on the MHUB chassis using a
good quality HDMI cable.
The steps below describe how to connect a single HDMI source to a display location for outputs A-H and enable remote control (IR) signals to be sent from that location back to your
MHUB chassis. Repeat the steps below as necessary for each source or display.
2
Connect a CAT cable between one of the HDBASET output ports (labelled A-H)
on the MHUB chassis, and the “HDBASET” port on the MHUB receiver, power on
the matrix via the included IEC cable.
3
Connect a HDMI cable between the port labelled “HDMI OUT” on the
MHUB receiver and a HDMI port on your display. Ensure that your
display is switched to the correct input. Note: MHUB receivers do not
need any power cables to work, power is delivered from the MHUB
chassis. Check the white LED light on the MHUB receiver is lit, this
indicates a connection with the MHUB chassis. Check that you are
receiving a picture on the connected display.
4
6
5
To control your HDMI source from your display location, connect an IR TX to the
“SOURCE IR (OUT)” port on the MHUB chassis, that matches the “SOURCE
INPUT” port number for the source you want to control. Connect an IR RX to the
“IR (IN)” port on the MHUB receiver.
Test the IR control is working by using the source device remote pointed
towards the IR receiver at your display location.
To complete the installation, connect the MHUB “IP” port to your router via an
ethernet cable and follow the information on the attached ‘Next Steps’ sheet.
HDMI CABLE
CAT6 CABLE
INFRARED (IR) CABLE
NETWORK CABLE
POWER
1
6
2
3
4
5
CAT6 RESOLUTION/DISTANCE GUIDE
HD
0m
0ft
10m
32ft
20m
65ft
30m
98ft
40m
131ft
50m
164ft
60m
197ft
70m
230ft
80m
262ft
90m
295ft
100m
328ft
UHD
1 2
3 4
1x IEC POWER CABLE
1x MHUB PRO (8X8) 70 CHASSIS
8x MHUB PRO (8X8) 70 RECEIVERS + 16x MOUNTING WINGS 1x CONTEXTUAL & 1x MASTER REMOTEINFRARED (IR) CABLE2x CHASSIS MOUNTING WINGS
10x IR RX
17x IR TX
IN THE BOX
5 6
7 8
OK
E
1
2
3
4 5
6
7
8
F
G H
OK
E
1
2
3
4 5
6
7
8
F
G H
PRO
MHUB