Canon BJC-S330 Start Here

Download Setup instructions of Canon 7611A001 - S 330 Color Inkjet Printer Printer for Free or View it Online on All-Guides.com.

Canon 7611A001 - S 330 Color Inkjet Printer Setup instructions - Page 1
1
Canon 7611A001 - S 330 Color Inkjet Printer Setup instructions - Page 2
2
Color Bubble Jet Printer
S330
Start Here
Easy Setup Instructions
Carefully remove all items from the box.
S330 Series
Color Bubble Jet Printer
Documentation
and Software Kit
Power Cord
S330 Print Head
Paper Rest
Output Tray
Ink Tanks
BCI-24 Black BCI-24 Color
POWER
Lamp
POWER
Button
Serial number
Shipping Tape
Remove the print head from its package.
NOTE: Do not touch the electrical contacts.
Raise the gray lock lever.
Slide the print head into the holder until
it is securely seated.
Do not press it down.
Lower the lever until it locks into place.
Protective cap
Remove the black ink tank (BCI-24 Black)
from its packaging and pull off the orange
protective cap.
NOTE: To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.
Insert the black ink tank into the slot on
the right. Press down until the ink tank
locks into place.
Repeat the procedure for the color ink tank
(BCI-24 Color), inserting it into the remaining
slot.
Close the front cover and attach the
paper rest and output tray.
Turn the printer off.
Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
IMPORTANT: Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Continue with Step 6
on side two.
USB Port
USB Cable
Turn the print head over, then remove
the orange protective cap.
Electrical contacts
Open the front cover. The print head holder
automatically moves to the center.
Press the POWER button.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Remove the shipping tape from the front
and sides of the printer.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
1
2
3
4
5
1
5
4
3
1
2
1
2
3
4
1
2
2
Prepare the Printer
1
Unpack the Printer
3
Install the Print Head
4
Install the Ink Tanks
5
Connect the Printer
To Your Computer