Canon BJC-S750 Start Here

Download Setup instructions of Canon BJC-S750 Printer for Free or View it Online on All-Guides.com.

Brand: Canon

Category: Printer

Type: Setup instructions

Model: Canon BJC-S750 , Canon S750 - S 750 Color Inkjet Printer

Pages: 2 (0.89 Mb)

Download Canon BJC-S750 Setup instructions

Canon BJC-S750 Setup instructions - Page 1
1
Canon BJC-S750 Setup instructions - Page 2
2
Install the Ink Tanks
Unpack the Printer
1
2
34
5
Prepare the Printer
Install the Printhead
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
Color Bubble Jet
Printer
Pull the orange tab off the yellow ink tank
(BCI-3eY), then remove and discard the
plastic wrapper.
Twist off and discard the orange
protective cap.
NOTE: To avoid spilling ink, never press on
the sides of an ink tank.
Insert the ink tank into the correct slot.
(Refer to the color guide on the printhead.)
Press down gently until the ink tank locks
into place.
Insert the remaining three ink tanks into
their assigned slots.
Close the front cover and attach the
paper rest and output tray.
Electrical contacts
Gently slide the printhead into the holder.
The printhead will rest at a slight angle.
Do not press it down.
Remove the printhead from its package.
Turn the printhead over, then remove
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Lower the lock lever and gently press
it down until it locks into place.
Raise the gray lock lever.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The printhead holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the printhead. You will need
this later to register the product.
Remove the shipping tape from the
front and sides of the printer.
Ink Tanks
BCI-3eC Cyan BCI-3eM Magenta
BCI-3eBK Black BCI-3eY Yellow
POWER
Lamp
POWER
Button
Shipping Tape
Serial number
Protective tape
(IEEE 1284 compliant)
Parallel Cable
For USB Cables:
For Parallel Cables:
Parallel Port
Secure
Wire Clips
Parallel Cable
USB Port
USB Cable
Continue with Step 6
on side two.
Turn the printer off.
Connect one end of the USB cable
to the computer, the other to the printer.
Turn the printer off.
Connect one end of the parallel cable to
the computer, the other to the printer.
IMPORTANT: Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
IMPORTANT: Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
Carefully remove all items from the box.
Power Cord
S750 Series
Color Bubble Jet Printer
Documentation
and Software Kit
S750 BJ (Bubble Jet) Printhead
Paper Rest
Output Tray
Press the POWER button.
Protective cap
1
2
3
4
1
5
4
3
1
2
1
2
3
4
5
1
2
2
1