Canon BJC-S900 Start Here
Download Setup instructions of Canon BJC-S900 Printer for Free or View it Online on All-Guides.com.
Brand: Canon
Category: Printer
Type: Setup instructions
Model: Canon BJC-S900 , Canon S900 - S 900 Color Inkjet Printer
Pages: 2 (1.15 Mb)
1
2
Install the Ink Tanks
Unpack the Printer
1
2
34
5
Prepare the Printer
Install the Print Head
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
Photo Printer
S900
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head.)
Press down gently until the ink tank locks
into place.
Electrical contacts
Gently slide the print head into the holder.
The print head will rest at a slight angle.
Do not press it down.
Remove the print head from its package.
Turn the print head over, then remove
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Lower the lock lever and gently press
it down until it locks into place.
Raise the gray lock lever.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
Serial number
Protective tape
Press the POWER button.
Remove the shipping tape from the
front and sides of the printer.
POWER
Lamp
POWER
Button
Shipping Tape
Carefully remove all items from the box.
S900
Photo Printer
Documentation
and Software Kit
Paper Rest
Pull the orange tab off the yellow ink tank
(BCI-6Y), then remove and discard the
plastic wrapper.
Twist off and discard the orange
protective cap.
NOTE: To avoid spilling ink, never press on
the sides of an ink tank.
Insert the remaining five ink tanks into
their assigned slots.
Close the front cover, attach the paper rest
and extend the paper output tray.
Protective cap
Ink Tanks
BCI-6C Cyan BCI-6M Magenta
BCI-6BK Black BCI-6Y Yellow
BCI-6PC Photo Cyan BCI-6PM Photo Magenta
Power Cord
S900 Print Head
USB Port
USB Cable
Continue with Step 6
on side two.
Turn the printer off.
Connect one end of the USB cable
to the computer, the other to the printer.
IMPORTANT: Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
1
2
3
4
1
5
4
3
1
2
1
2
3
4
5
1
2