Canon i320 Start Here

Download Setup instructions of Canon i320 Printer for Free or View it Online on All-Guides.com.

Brand: Canon

Category: Printer

Type: Setup instructions for Canon i320

Pages: 2 (1.15 Mb)

Download Canon i320 Setup instructions

Canon i320 Setup instructions - Page 1
1
Canon i320 Setup instructions - Page 2
2
Macintosh
Place a stack of blank paper in the
paper rest.
Before using the printer, align the print
head to ensure the best quality printing.
Start the alignment procedure.
Macintosh:
a. From the File menu in a software
application, click Page Setup.
b. Click the Utilities button.
c. Click the down-arrow to select
Test Print.
d. Click the Print Head Alignment icon.
e. Wait about 60 seconds for the
calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.
Click OK (Windows) or Close then OK
(Macintosh) when finished.
Windows:
a. For Windows XP select Start,
Settings, then Control Panel, then
click on Printers and Other Hardware,
then Printers and Faxes.
b. Right-click the Canon i320 icon,
then click Printing Preferences.
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
d. When asked to start print head
alignment, click OK.
e. Wait about 60 seconds for the
calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.
QA7-2171-V01/082002A
©2002 Canon U.S.A. Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN THAILAND
From the Application folder, double-click
on the software to be installed. Follow the
on-screen instructions.
When the “Installation was successful”
screen displays, Restart
your computer.
TURN THE PRINTER ON. Select the Apple
menu, then Chooser.
Click on the
i320 printer icon.
Close the Chooser.
NOTE: Register your product at
www.registercanon.com to ensure product
support.
To ensure highest quality output, continue
with Step 7 Align the Print Head.
Open the printer driver folder on the
CD-ROM, then double-click the Installer
icon.
Read the License Agreement, click
Accept
to continue.
Click Install. The printer driver will load
automatically.
NOTE: Screen shots may differ depending on
the operating system used.
Turn the computer on and LEAVE THE
PRINTER OFF
. Then insert the “i320 Setup
Software & User’s Guide” CD-ROM.
IMPORTANT: Drivers included with
this printer support Mac 8.6-9.x. For
Mac OS X driver and instructions, go
to www.canontechsupport.com.
If the message “No other applications can
be running...” displays, click Continue.
When the “Installation was successful”
screen displays, click Restart.
When the driver installation is complete,
click Finish.
Register your product to ensure
product support. Follow the on-screen
instructions.
When the software menu appears, click
Install.
When the software installation is complete,
click OK, then Exit.
To ensure highest quality output, continue
with Step 7 Align the Print Head.
Turn the computer on and LEAVE THE
PRINTER OFF
.
Close all software applications, then insert
the “
i320 Setup Software & User’s Guide”
CD-ROM. The setup program should run
automatically.
NOTE: For Windows
®
XP or Windows 2000,
log on to Windows as an Administrator before
continuing.
IMPORTANT: If you see the Found
New Hardware Wizard, click Cancel.
When the main menu appears, click
Install.
Read the License Agreement, then click
Yes to continue.
NOTE: If the CD-ROM does not run automatically,
double-click My computer, then double-click the
CD-ROM icon.
When the Printer Port window appears,
TURN THE PRINTER ON. The software will
begin identifying the printer port being
used.
IMPORTANT: If your computer can
not detect a printer port, refer to the
Troubleshooting chapt
er in the i320
Quick Start Guide for instructions.
1
8
2
3
4
9
10
5
6
7
5
6
1
2
3
4
7
9
10
11
12
8
1
2
3
Windows
6
Install the Printer Driver (Windows
®
)
6
Install the Printer Driver (Macintosh
®
)
7
Align the Print Head