Carrier 38QRR Installation Instructions Manual
Download Installation instructions manual of Carrier 38QRR Air Conditioner, Heat Pump for Free or View it Online on All-Guides.com.
Brand: Carrier
Category: Air Conditioner , Heat Pump
Type: Installation instructions manual for Carrier 38QRR
Pages: 10 (0.58 Mb)
1
2
3
4
5
6
7
8
9
10
38QRR
P erformance™ Series Heat Pumps
with PURONr Refr igerant
1 --- 1 / 2 t o 5 N o m i n a l To n s
Installation Instructions
A07532
Fig. 1 --- 38QRR
NOTE: Read the entire instruction manual before starting the
installation.
TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS 1........................
INSTALLATION 2--3.................................
Complete Pre--Installation Checks 2...................
Rig and Mount Unit 2..............................
Complete Refrigerant Piping Connections 3.............
Make Electrical Connections 3........................
START --UP 4........................................
SERVICE 5.........................................
MAINTENANCE 7...................................
TROUBLESHOOTING 9--10...........................
SAFETY CONSIDERATIONS
Improper installation, adjustment, alteration, service, maintenance,
or use can cause explosion, fire, electrical shock, or other
conditions which may cause death, personal injury, or property
damage. Consult a qualified installer, service agency, or your
distributor or branch for information or assistance. The qualified
installer or agency must use factory--authorized kits or accessories
when modifying this product. Refer to the individual instructions
packaged with the kits or accessories when installing.
Follow all safety codes. Wear safety glasses, protective clothing,
and work gloves. Use quenching cloth for brazing operations.
Have a fire extinguisher available. Read these instructions
thoroughly and follow all warnings or cautions included in
literature and attached to the unit. Consult local building codes and
the current editions of the National Electrical Code (NEC)
NFPA70.
In Canada, refer to the current editions of the Canadian Electrical
Code CSA C22.1.
Recognize safety information. This is the safety-- alert symbol
.
When you see this symbol on the unit and in instructions or
manuals, be alert to the potential for personal injury. Understand
the signal words DANGER, WARNING,andCAUTION. These
words are used with the safety--alert symbol. DANGER identifies
the most serious hazards which will result in severe personal injury
or death. WARNING signifies hazards which could result in
personal injury or death. CAUTION is used to identify unsafe
practices which may result in minor personal injury or product and
property damage. NOTE is used to highlight suggestions which
will result in enhanced installation, reliability, or operation.
!
WARNING
ELECTRICAL SHOCK HAZARD
Failure to follow this warning could result in personal injury
or death.
Before installing, modifying, or servicing system, main
electrical disconnect switch must be in the OFF position.
There may be more than 1 disconnect switch. Lock out and
tag switch with a suitable warning label.
ENVIRONMENTAL HAZARD
Failure to follow this caution may result in environmental
pollution.
Remove and recycle all components or materials (i.e. oil,
refrigerant, etc.) before unit final disposal.
CAUTION
!