• Home
• Brands
• CARVIN Manuals
• CARVIN UX16-BP
• Carvin UX16-MC Instruction Manual

Carvin UX16-MC Instruction Manual

Download Instruction manual of CARVIN UX16-BP Microphone for Free or View it Online on All-Guides.com.

1

2

3

4

Receiving System Diversity- PLL Synthesized

Stability ± 0.005%

Signal-to-noise >

100 dB

Image Rejection >60 dB

THD ≤1% @ 1kHz

RF Sensitivity -107dBµ for 12 dB S/N AD

Audio Output -12 dB

µ

/ 600 ohm -unbalanced

Output Conn. Unbalanced 1/4” phone jack

Balanced XLR M-type

Power Supply 12-18V DC, 500 mA, with provided

AC adapter

Dimensions 8.701” (221 mm) W x 1.575” (40

mm) H x 5.984” (152 mm) D

Net Weight 1 lbs (.5 kgs)

Accessories Rack mount adapters, AC adapter

W

arranty

90 days

Congratulations on your purchase of the 16 Channel UX SERIES Professional Wireless

System. These systems include a receiver along with a handheld mic with transmitter

(UX16-MC) or a belt-pack transmitter (UX16-BP) depending on the model purchased. The

headworn mic (UXHM), cable for instrument (UXGT) and Lavaliere mic (UXLP) are all

available as additional options to the UX16-BP belt-pack system.

The receiver features true UHF diversity reception. Two antennas feed two completely

independent RF receivers on the same frequency. Automatic logic circuitry continuously

compares and selects the superior signal to provide better sound quality and reduce the

possibility of interference and dropouts. Both the transmitter and receiver have 16 user

selectable channels. The receiver can be mounted in a standard 19” rack (1U) with use of

the optional UX-DR adapter.

The versatile UX16-BP belt-pack transmitter is designed for use with condenser micro-

phones as well as Hi-Z line instrument pickups. Please note that in multiple-system appli-

cations there must be one transmitter per receiver.

RF Power Output 3 mW

Spurious Rejection < -60 dBC

Stability ± 0.005%

Frequency Deviation ± 48kHz

Battery AA 1.5v alkaline qty 2

S/N

Ratio

>100dB (1kHz-A)

Current Consumption 100mA typical

Dimensions 2.56” W x 4” H x 1” D

Net Wt (no battery) 2.8 oz (78 grams)

Warranty 90 days

Polar Pattern Unidirectional

RF Power Output 3 mW

Spurious Emissions Under federal regulations

Dynamic Range ≥100 dB

Batter

y

AA 1.5v alkaline qty 2

Current Consumption 30 mA typical

Battery Life Approx. 25 hours

Dimensions 9.50” long, 2.10” dia.

Net Wt (no batter

y)

12.7 oz (360 grams)

Accessor

y Included

mic clip

W

arranty

90 days

12340 World Trade Drive, San Diego, CA 92128

800-854-2235

www.carvin.com

I

f you’re like most new owners, you’re probably in a hurry to plug your wireless system in and

use it. Here are some brief instructions to get you going quickly

. With the wireless system

unplugged and the unit turned off, complete the following procedures:

1.

Check that both the transmitter and receiver are set to corre-

sponding channel. If multiple systems are used, each system must be set to their own

channel.

2.

There are two audio outputs on the back of the receiver:

balanced XLR and unbalanced 1/4”. Connect the appropriate cables for your system.

3.

Connect the included AC adapter to the DC power input on

the back of the receiver. Then plug the adapter into a standard 120 volt 60 Hz AC power

outlet.

4.

Turn down the Volume control of the receiver as well as the

mixer. Switch on the receiver only. Do not switch on the transmitter yet. The power indi-

cator will light up even though the transmitter is not on.

5.

Connect the guitar cable or mic to the Belt-pack.

6.

Insert fresh AA alkaline batteries into the transmitter.

7.

Switch the transmitter to the “on” position.

8.

Do a sound check and gradually raise the level while watching the

AF level indicator

. Increase the level until the AF level indicator peaks. This indicates that

maximum transmitter modulation without distortion has been reached. You can adjust

the AF level of the transmitter using the included small screwdriver.

INSPECT YOUR WIRELESS

SYSTEM FOR ANY DAMAGE which may have occurred during

shipping. If any damage is found, please notify the shipping company and CARVIN immedi-

ately.

SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your unit,

always use the original carton and packing material. This will provide the best possible pro-

tection during shipment. CARVIN and the shipping company are not liable for any damage

caused by improper packing.

SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.

SHIPMENT SHORTAGE. If you find items missing, they may have been shipped separately.

Please allow several days for the rest of your order to arrive before inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual for your

records. Keep your portion of the card and return the portion with your name and comments to us.

For your records, you may wish to record the following information.

Serial No._____________________ Invoice Date_______________

This device complies with part 15 of the FCC Rules. Operation is subject to the condi-

tion that this device does not cause harmful interference. This device complies

with INDUSTRY CANADA R.S.S. 210, en conformite´ avec IC: RSS-210/CNR210.

CAUTION! Electrical shock can result from removal of the receiver cover. Refer servicing

to qualified service personnel. No user-serviceable parts inside. Do not expose to rain or

moisture. The circuits inside the receiver and transmitter have been precisely adjusted for

optimum performance and compliance with federal regulations. Do not attempt to open the

receiver or transmitter. To do so will void the warranty, and may cause improper operation.

CARVIN ENGINEERING DATA

c

90 days on all electronic components. Does not cover cable connectors or broken parts

caused by normal wear or abuse.

UX16-MC, UX16-BP Wireless System