• Home
• Brands
• LEGRAND Manuals
• LEGRAND Wattstopper DT-200
• LEGRAND Wattstopper DT-200 Installation Instructions Manual

LEGRAND Wattstopper DT-200 Installation Instructions Manual

Download Installation instructions manual of LEGRAND Wattstopper DT-200 Kitchen Appliances for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Wattstopper

®

Dual Technology • Low Voltage Occupancy Sensor (version 3)

with Light Level, Isolated Relay and Manual On Features

Double technologie • Détecteur de présence basse tension (v3)

avec les fonctionnalités de niveau de luminosité, de relais isolé et de

marche manuelle

Doble Tecnología • Sensor de ocupación de Bajo voltaje (v3)

con nivel de luz, relé aislado y funciones de encendido manual

Installation Instructions • Instructions d’Installation • Instrucciones de Instalación

No: 24163 – 03/17 rev. 1

Catalog Number • Numéro de Catalogue • Número de Catálogo: DT-200

Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China

DT-200-U is BAA and TAA compliant (Product produced in the U.S.)

SPECIFICATIONS

Voltage .........................................................................18-28VDC/VAC

Current Consumption ....................................................................25mA

Power Supply ................................................Wattstopper Power Packs

Isolated Relay Rating ................................................ 1A @30VDC/VAC

Operating Temperature ..................................32° to 131°F (0° to 55°C)

Light Level One-Step Adjustment ................................. 10FC to 200FC)

Time Delay Adjustment .................................30 seconds to 30 minutes

Walk-Through Mode ........... 3 minutes if no activity after 30 sec.

Test Mode .......................................... 5 sec. or DIP switch reset

PIR Coverage (Typical) .............................................................1000 ft2

Sensitivity Adjustment .............High or Low (DIP switch setting)

Ultrasonic Coverage (Typical) ............................................800-1200 ft2

Sensitivity Adjustment .............. Minimum to Maximum (trimpot)

Frequency ........................................................................40kHz

DESCRIPTION AND OPERATION

The Wattstopper DT-200 Dual Technology occupancy sensors combine advanced passive infrared (PIR) and ultrasonic technologies

into one unit. The combination of these technologies helps to eliminate false triggering problems even in difficult applications.

The DT-200 turns lighting systems ON and OFF based on occupancy and ambient light levels.

The DT-200 offers numerous operating modes that can be combined to create the ideal custom control. The sensors can be configured

to turn lighting ON, and hold it ON as long as either or both technologies detect occupancy. After no movement is detected for the

duration of the time delay (30 seconds to 30 minutes) the lights are switched OFF. A “walk-through” mode can turn lights OFF after only

3 minutes, if no activity is detected after 30 seconds of an occupancy detection.

The DT-200 operates on 24VDC supplied by Wattstopper Power Packs. DT-200 sensors also have an isolated relay with Normally Open

and Normally Closed contacts for interfacing with HVAC or EMS.

COVERAGE PATTERN

The DT-200 provides an elliptical coverage pattern. The coverage shown represents

walking motion at a mounting height of 10 feet. For building spaces with lower levels

of activity, or with obstacles and barriers, coverage size may decrease.



IW

IWIWIW IW

3,5

FRYHUDJH

IW

8OWUDVRQLF

FRYHUDJH

IW

Dense Wide Angle Lens

up to 2000 sq ft for walking motion

up to 1000 sq ft for desktop motion