Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
6. Place one hand underneath the SF module to support it, and slide it completely out
of the chassis. Place it on the antistatic mat.
CAUTION: Do not stack hardware components on one another after you
remove them. Place each component on an antistatic mat resting on a
stable, flat surface.
7. If you are not replacing the SF module, install a cover panel over the empty slot.
Figure 70 on page 213 shows removing an SF module from an EX9208 switch. The
procedure is the same for all EX9200 switches.
Figure 70: Removing an SF Module from an EX9200 Switch
ESD
g022008
SF
Ejectors
Related
Documentation
• Installing an SF Module in an EX9200 Switch on page 209
• Switch Fabric Module in an EX9200 Switch on page 33
• Routing Engine Module in an EX9200 Switch on page 29
213Copyright © 2017, Juniper Networks, Inc.
Chapter 19: Upgrading and Replacing Switch Fabric (SF) Module