Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
To remove the cable management bracket:
1. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
ESD points on the chassis.
2. Unscrew the nuts on the corners of the cable management bracket by using the 7/16 in.
(11 mm) nut driver. See Figure 89 on page 249.
Figure 89: Removing the Cable Management Bracket
g022045
3. Grasp the bottom of the cable management bracket and pull it straight out from the
studs on the chassis.
Related
Documentation
• Installing the Cable Management Bracket in an EX9214 Switch on page 247
• Cable Management Bracket in an EX9214 Switch on page 41
249Copyright © 2017, Juniper Networks, Inc.
Chapter 25: Replacing Cable Management Bracket