Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
Related
Documentation
Rack Requirements on page 90•
• Cabinet Requirements on page 91
• Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift on page 141
• Installing and Removing EX9214 Switch Hardware Components on page 144
Field-Replaceable Units in an EX9200 Switch
Field-replaceable units (FRUs) are switch components that you can replace at your site.
The EX9200 switch uses the following types of FRUs:
•
Hot-insertable and hot-removable—You can remove and replace these components
without powering off the switch or disrupting the switching function.
•
Hot-pluggable—You can remove and replace these components without powering off
the switch, but the switching function is interrupted until you replace the component.
Table 8 on page 19 lists the FRUs for the EX9200 switch and their types.
Table 8: FRUs in an EX9200 Switch
TypeFRU
Hot-insertable and hot-removable.Power supplies
Hot-insertable and hot-removable.Fan tray and air filter
Redundant configuration:
•
Master RE module is hot-pluggable.
•
Backup RE module is hot-insertable and
hot-removable.
Base configuration:
•
You must disable the switch before
removing any RE module. See “Taking the
Host Subsystem Offline in an EX9200
Switch” on page 203.
See EX9204 Switch Configurations, EX9208
Switch Configurations, and “EX9214 Switch
Configurations” on page 8.
Routing Engine module (RE module)
19Copyright © 2017, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions