Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
Table 17: Network Port LEDs on Line Cards in an EX9200 Switch—Status
LED
State, Color, and DescriptionLCD IndicatorLED
Indicates the administrative status (enabled or
disabled). The status indicators are:
•
Green—Administrative status enabled.
•
Yellow—The port is down.
•
Unlit—Administrative status disabled.
LED: ADMStatus
Indicates the speed. The speed indicators are
different in the line cards.
LED: SPD
•
Unlit—10 Mbps
•
Green—Blinking—100 Mbps
•
Green—On steadily—1000 Mbps
Indicates the duplex mode. The status
indicators are:
•
Green—Port is set to full-duplex mode.
•
Unlit—Port is not set to full-duplex mode.
LED: DPX
Related
Documentation
Line Card LED in an EX9200 Switch on page 75•
• Craft Interface in an EX9200 Switch on page 22
Modular Interface Card LED in an EX9200 Switch
The Modular Interface Cards (MICs) in the following line cards for EX9200 switches have
an LED labeled OK/FAIL on the faceplate that indicates the online status information of
MICs.
•
EX9200-4QS Line Card on page 59
•
EX9200-MPC Line Card on page 62
•
EX9200-40F Line Card on page 71
•
EX9200-40F-M Line Card on page 72
•
EX9200-40T Line Card on page 69
Table 18 on page 39 describes the MIC LED on line cards for EX9200 switches, its colors
and state, and the status it indicates.
Copyright © 2017, Juniper Networks, Inc.38
EX9214 Switch Hardware Guide