Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
•
Two dust covers for the two 100-Gigabit Ethernet ports and eight dust covers for the
eight 10-Gigabit Ethernet ports
•
Line card LED—An LED labeled OK/FAIL, which indicates the status of the line card.
See “Line Card LED in an EX9200 Switch” on page 75.
•
LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the
link status and activity on the port. See “Network Port LEDs on Line Cards in an EX9200
Switch” on page 37.
The ports are divided into two port groups. The four 10-Gigabit Ethernet ports labeled
0/0 through 0/3 and the 100-Gigabit Ethernet port labeled 1/0 form one port group. The
four 10-Gigabit Ethernet ports labeled 2/0 through 2/3 and the 100-Gigabit Ethernet port
labeled 3/0 form the other port group. The ports in each group share 130 gigabits of
bandwidth. Thus, you can transmit up to 130 gigabits of traffic through a port group,
without packet drop.
Related
Documentation
Line Card Model and Version Compatibility in an EX9200 Switch on page 55•
• Pluggable Transceivers Supported on EX9200 Switches on page 105
• Installing a Line Card in an EX9200 Switch on page 220
• Handling and Storing Line Cards in EX9200 Switches on page 215
EX9200-4QS Line Card
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that you can
install in the line card slots on the front of the switch chassis. Line cards are hot-insertable
and hot-removable: You can remove and replace them without powering off the switch
or disrupting switch functions.
This topic describes:
•
Line Card Models on page 59
•
Line Card Components on page 60
Line Card Models
Table 26 on page 59 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.
Table 26: EX9200-4QS Line Card
Junos OS Release
RequiredDescriptionModel
12.3R2 or laterA line card with four 40-Gigabit Ethernet ports,
each of which can house 40-gigabit quad small
form-factor pluggable plus (QSFP+) transceivers
EX9200-4QS
See Figure 25 on page 60.
59Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Line Cards