Juniper EX3400 Features Manual
Download Features manual of Juniper EX2300 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Features manual
Model: Juniper EX2300 , Juniper EX4300 , Juniper EX3400
Pages: 476
• Configuring an Extended DHCP Relay Server on EX Series Switches (CLI Procedure)
on page 49
• Configuring a DHCP SIP Server (CLI Procedure) on page 18
• Upgrading Software by Using Automatic Software Download
Configuring DHCP Services (J-Web Procedure)
•
Configuring DHCP Services (J-Web Procedure) on EX Series Switches on page 7
•
Configuring DHCP Services on EX4300 Switches (J-Web Procedure) on page 10
Configuring DHCP Services (J-Web Procedure) on EX Series Switches
NOTE: This topic applies only to the J-Web Application package.
Use the J-Web DHCP Configuration pages to configure DHCP pools for subnets and static
bindings for DHCP clients on an ACX Series Universal Access Gateway router or an EX
Series Ethernet Switch. If DHCP pools or static bindings are already configured, use the
Configure Global DHCP Parameters Configuration page to add settings for these pools
and static bindings. Settings that have been previously configured for DHCP pools or
static bindings are not overridden when you use the Configure Global DHCP Parameters
Configuration page.
To configure the DHCP server:
1. Select Configure > Services > DHCP
2. Access a DHCP Configuration page:
•
To configure a DHCP pool for a subnet, click Add in the DHCP Pools box.
•
To configure a static binding for a DHCP client, click Add in the DHCP Static Binding
box.
•
To globally configure settings for existing DHCP pools and static bindings, click
Configure Global DHCP Parameters.
3. Enter information into the DHCP Service Configuration pages as described in
Table 4 on page 8
4. To apply the configuration, click Apply.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select Commit Options > Commit. See Using
the Commit Options to Commit Configuration Changes for details about
all commit options.
7Copyright © 2017, Juniper Networks, Inc.
Chapter 1: DHCP Services