Juniper EX3400 Features Manual
Download Features manual of Juniper EX2300 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Features manual
Model: Juniper EX2300 , Juniper EX4300 , Juniper EX3400
Pages: 476
Table 18: show dhcp server binding Output Fields (continued)
Level of OutputField DescriptionField Name
detailState of the liveness detection status for a subscriber’s
Bidirectional Forwarding Detection (BFD) protocol session:
NOTE: This output field displays status only when liveness
detection has been explicitly configured for a subscriber
and the liveness detection protocol is actively functioning
for that subscriber.
• DOWN—Liveness detection has been enabled for a
subscriber but the broadband network gateway (BNG)
detects that the liveness detection session for the BFD
protocol is in the DOWN state.
A liveness detection session that was previously in an
UP state has transitioned to a DOWN state, beginning
with a liveness detection failure, and ending with the
deletion of the client binding. The DOWN state is reported
only during this transition period of time.
• UNKNOWN—Liveness detection has been enabled for a
subscriber but the actual liveness detection state has
not yet been determined.
The UNKNOWN state is reported after a DHCP subscriber
initially logs in while the underlying liveness detection
protocol handshake, such as BFD, is still processing and
the BFD session has not yet reached the UP state.
• UP—Liveness detection has been enabled for a
subscriber, and the BNG and the subscriber or client have
both determined that the liveness detection session for
the BFD protocol is in the UP state.
• WENT_DOWN—State is functionally equivalent to the
DOWN state. A liveness detection session that was
previously in an UP state has transitioned to a DOWN
state implying a liveness detection failure.
The WENT_DOWN state applies to the internal
distribution of the liveness detection mechanism
between the Junos DHCP Daemon for Subscriber
Services (JDHCPd), the BFD plug-in within the
Broadband Edge Subscriber Management Daemon
(BBE-SMGD), and the Packet Forwarding Engine.
Liveness Detection State
detailInternally generated name of the dynamic agent circuit
identifier (ACI) interface set.
ACI Interface Set Name
detailIndex number of the dynamic ACI interface set.ACI Interface Set Index
detailIdentifier of the dynamic ACI interface set entry in the
session database.
ACI Interface Set Session ID
detailDHCP client profile name.Client Profile Name
detailDHCP server profile name.Dual Stack Group
detailIPv6 prefix of peer.Dual Stack Peer Prefix
381Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)