Juniper EX3400 Features Manual
Download Features manual of Juniper EX2300 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Features manual
Model: Juniper EX2300 , Juniper EX4300 , Juniper EX3400
Pages: 476
allow-snooped-clients;
}
}
}
}
}
}
Related
Documentation
DHCP Snooping Support•
• Configuring DHCP Snooped Packets Forwarding Support for DHCP Relay Agent on
page 77
• Example: Configuring DHCP Snooping Support for DHCP Relay Agent
• Overriding the Default DHCP Relay Configuration Settings on page 68
Configuring DHCP Snooped Packets Forwarding Support for DHCP Relay Agent
You can configure how DHCP relay agent handles DHCP snooped packets. Depending
on the configuration, DHCP relay agent either forwards or drops the snooped packets it
receives.
DHCP relay uses a two-part configuration to determine how to handle DHCP snooped
packets. This topic describes how you use the forward-snooped-clients statement to
manage whether DHCP relay agent forwards or drops snooped packets, depending on
the type of interface on which the packets are snooped. In the other part of the DHCP
relay agent snooping configuration, which is described in “Enabling and Disabling DHCP
Snooped Packets Support for DHCP Relay Agent” on page 72, you enable or disable the
DHCP relay snooping feature.
Table 11 on page 78 shows the action the router or switch takes on snooped packets
when DHCP snooping is enabled by the allow-snooped-clients statement.
Table 12 on page 78 shows the action the router (or switch) takes on snooped packets
when DHCP snooping is disabled by the no-allow-snooped-clients statement.
The router or switch also uses the configuration of the DHCP relay agent forwarding
support to determine how to handle snooped BOOTREPLY packets. Table 13 on page 78
shows the action the router (or switch) takes for the snooped BOOTREPLY packets.
NOTE: Configured interfaces have been configured with the group statement
in the [edit forwarding-options dhcp-relay] hierarchy. Non-configured interfaces
are in the logical system/routing instance but have not been configured by
the group statement.
77Copyright © 2017, Juniper Networks, Inc.
Chapter 4: DHCP Relay Agent