HP Elite x3 Maintenance And Service Manual
Download Maintenance and service manual of HP ELITE X3 Cell Phone, Laptop for Free or View it Online on All-Guides.com.
Brand: HP
Category: Cell Phone , Laptop
Type: Maintenance and service manual for HP ELITE X3
Pages: 47
Chassis and battery removal
Description Spare part number
Chassis, pre-assembled, includes upper and lower speakers, battery, lens, adhesive, and thermal pad
NOTE: If you replace the chassis, you must also replace the battery.
903685-001
Battery, 1 C, 15 WHr, LI non-user removable
NOTE: If you replace the battery, you must also replace the chassis.
838524-005
Tape, battery adhesive 903695-001
Before disassembling the device, follow these steps:
1. Disconnect the power from the device by unplugging the power adapter cord from the device.
2. Turn o the device. If you are unsure whether the device is o, turn the device on, and then shut it down
through the operating system.
3. Disconnect all external devices from the device.
4. Remove the card reader tray (see Card reader tray on page 17).
5. Remove the end cap (see End cap on page 18).
6. Remove the display panel assembly (see Display panel assembly on page 19).
CAUTION: Disconnecting a battery that is the sole power source for the device can cause loss of
information. To prevent loss of information, save your work or shut down the device through the operating
system before disconnecting the battery.
IMPORTANT: Do not remove the battery from the chassis. If you are installing a new battery or a new
chassis, you must replace both the chassis and battery with a new chassis and new battery.
Remove the chassis and battery:
1. Remove the 15 T5 chassis screws from the chassis.
NOTE: The three screws at the top and four screws at the bottom are captive screws.
For certain products, adhesive tape may cover one of the top screws. Remove the adhesive tape to
access the screw.
Chassis and battery removal 27